|
|
 |
|
|
|
Mopar Partial Body Fastener Kits |
|
|
|
1970-1974
Dodge Challenger BIG
KIT This kit contains these separately packaged & labeled
fastener component kits: Windshield Wiper Arm, Grille Brace,
Headlight Brace, Cowl Vent, Front K-Frame to RCS, Splash Guard, Heater
Blower, Tail Light Mount, Deck Lid, Rear Quarter Extensions, Hood Bumper,
Hood Latch, Hood Hinge, Fender, Trunk Latch & Catch, Lower Fender, VIN
Plate, Emergency Brake Mounting, License Plate Bracket, Side Marker Light
Lens, Hood Alignment Pad, Front Valance - 266 piece kit
| Part # |
Price |
| 3-0401 |
$85.00 |
____ ____________________________________________
1970-1974
Dodge Challenger
FENDER KIT This
kit contains fasteners for the following components: Hood Latch, Hood Hinge, Trunk
Latch & Catch, Fender (fender, fender mount studs, fender count nuts),
Lower Fender (lower fender to splash guard, lower fender to body studs,
lower fender to body nuts) - 116 piece kit
| Part # |
Price |
| 3-0403 |
$60.00 |
 ________________________________________________
1970-1974
Dodge Challenger
EXTERIOR FASTENER KIT This
kit contains fasteners for the following components: Headlight Molding (headlight
molding, headlight molding upper), Parking Light (parking light bezel,
parking light bezel upper, parking light lens), Mirror, License Light
(license light mounting, license light lens), Wheel Well Molding. - 64
piece kit
| Part # |
Price |
| 3-0405 |
$15.00 |
________________________________________________
1970-1974
Dodge Challenger
INTERIOR FASTENER KIT This
kit contains fasteners for the following components: Sill Plate Molding,
Windshield Molding (windshield molding rear, windshield molding upper),
Roof Rail Molding, Shoulder Harness, Dash (dash lower, dash upper, dash
heater cover, dash panel), Seat Side Molding, Quarter Panel (quarter
panel, quarter panel lower), Door Seal Quarter Seal, Sun Visor, Center
Mirror, Speaker Cover, Arm Rest, Pillar Molding, Door Panel, Kick Panel
Molding, Seat Belt Collar, Molded Seat Back, Coat Hook, Seat Stop, Dome
Light, Window Handle - 150 pieces
| Part # |
Price |
| 3-0407 |
$32.00 |
_________________________________________ 1970-1974 Plymouth
Barracuda & CUDA
INTERIOR FASTENER KIT This
kit contains fasteners for the following components: Sill Plate Molding,
Windshield Molding (windshield molding rear, windshield molding upper),
Roof Rail Molding, Shoulder Harness, Dash (dash lower, dash upper, dash
heater cover, dash panel), Seat Side Molding, Quarter Panel (quarter
panel, quarter panel lower), Door Seal Quarter Seal, Sun Visor, Center
Mirror, Speaker Cover, Arm Rest, Pillar Molding, Door Panel, Kick Panel
Molding, Seat Belt Collar, Molded Seat Back, Coat Hook, Seat Stop, Dome
Light, Window Handle - 150 pieces
| Part # |
Price |
| 3-0420 |
$32.00 |
______________________________________________ Challenger
Grill Mount Fastener Kits 1970 -
contains fasteners for - Grill Mounting, Front Valance, Front License Plate, Front
Headlight Support Frame to Inner Fender & Core - 74 pcs 3-0470
$30.00 1971 - contains
fasteners for - Grill
Mounting, Gross Cross Bar Mounting, Front Valance, Front License Plate,
Front Headlight Support Frame to Inner Fender & Core - 66 pcs 3-0471
$29.00 1972-74 - contains
fasteners for -
Grill Mounting, Front Valance, Front License Plate, Front Headlight
Support Frame to Inner Fender & Core - 68 pcs 3-0472
$29.00 
________________________________________________ Barracuda
& CUDA Grill Mount Fastener Kits 1970
- contains fasteners for- Grill to Header Mounting, Front Valance, Front License Plate,
Front Headlight Support Frame to Inner Fender & Core - 82 pcs 3-0473
$32.00 1971 - contains
fasteners for - Grill
to Header Mounting, Front Valance, Front License Plate, Front Headlight
Support Frame to Inner Fender & Core - 78 pcs 3-0474
$32.00 1972-74 - contains
fasteners for -
Grill to Header Mounting, Front Valance, Front License Plate, Front
Headlight Support Frame to Inner Fender & Core - 82 pcs 3-0475
$32.00 
________________________________________________ 1970-74
E-Body Door Hinge Kit 52 pcs -
contains fasteners for - Hinge to Door Bolts, Hinge to Door Pillar Bolts
3-0480 $33.00
________________________________________________
E BODY SUSPENSION KIT 17-4
High Strength Stainless Steel Kit
contains 28 fasteners for the following: Front Shock, Leaf Spring
Front Mounting Bracket, Leaf Spring Rear Shackle Nut, Leaf Spring Front
Hanger Plate, Rear Shocks 3-5051
$74.50 
________________________________________________ 1968-1969 Plymouth
Barracuda INTERIOR SCREW
KIT DELUXE This kit contains
fasteners for the
following components: Sill Plate (Outer & Rear), Sill Plate
(Inner), Pillar Molding, Sun Visor, Center Mirror, Dash Bezel, Fold Down
Seat Backs, Front of Rear Floor (Upper), Front of Rear Floor (Lower), Kick
Panel, Seat Side Mould, Rear Wrap-Around, Roof Rail, Door Weather-strip,
Quarter Seal, Coat Hook, Arm Rest to Door, Arm Rest to Pad. 117
pieces
| Part # |
Price |
| 3-0430 |
$32.00 |
________________________________________________ 1968-1970
Dodge Charger Exterior
Screw Kit This kit contains
fasteners for the
following components: Outside Mirror, Parking Light Lens and
Mounting, Back-Up Light Lens, License Light Lens & Mounting. 21
pcs
| Part # |
Price |
| 3-0452 |
$12.00 |
_____________________________________________________ 1968
Dodge Charger Interior Kit This
kit contains fasteners for the following components: Outer Sill Plate, Dash Light
Screws, Steering Collar Screws, Windshield Moulding, Radio Bezel, Heater
Panel, Side Vent Screws, Sun Visor, Center Mirror, Kick Panels, Coat Hook,
Door Seal Screws, Quarter Seal Screws, Pillar Moulding, Dash Moulding, Arm
Rest. 97 pcs
| Part # |
Price |
| 3-0505 |
37.00 |
| |
|
___________________________________________ 1969
- 1970 Dodge Charger Interior
Kit This kit contains fasteners
for the
following components: A/C Side Vent, Coat Hook, Dash Light, Pillar
Moulding, Steering Column, Dash Bezel, Radio Panel, Dash Heater Panel,
Head Rest Collar, Kick Panels, Rear View Mirror, Sun Visor, Windshield
Moulding, Roof Rail Moulding, Windshield Moulding-Rear, Quarter Panel
Screws, Seat Side Moulding, Sill Plate, Door Seal Weatherstrip, Quarter
Seal, Arm Rest. 115 pcs
| Part # |
Price |
| 3-0506 |
38.00 |
| |
|
_______________________________________
1970 Roadrunner, GTX & Super Bee Interior
& Exterior Kit Includes
fasteners for: Sill Plate, Windshield Molding, Coat Hook, Dash
Light, Steering Collar, Dash, Radio Panel, Lights/Washer Panel, Left &
Right Dash Panel, Quarter Panel, Roof Rail, Center Mirror, Sunvisors,
Heater Panel, Kick Panel, Door Weatherstrip (front), Door Seal, Quarter
Seal, Pillar Molding, Armrest to Door, Armrest Pad, Parking Light, Backup
Light, Headlight Molding, Mirror, Wheel Well Molding
| Part # |
Description |
Price |
| 3-0436 |
Complete Interior & Exterior Kit |
$79.00 |
| 3-0438 |
Interior Kit |
$55.00 |
| 3-0440 |
Exterior Kit |
$30.00 |
| |
|
|
_________________________________________________ |
| 71-74 Roadrunner
Interior Fastener Kit
104 pcs- Containing fasteners
for: Sill Plate, Windshield, Pillar, Roof Rail, Dash, Quarter Panel,
Kick Panel, Seat Back, Coat Hook, Door Seal, Quarter Seal, Sun Visor,
Center Mirror
| Part # |
Price |
| 3-0446 |
$42.00 |
| |
|
________________________________________________ |
| 67-69
Dodge Dart 2Dr Interior Fastener Kit
104 pcs - Containing fasteners
for: Sill Plate, Windshield Moulding, Pillar Moulding, Seat Side
Moulding, Sunvisor, Center Mirror, Dash Bezel, Steering Collar, Kick
Panels, AC / Heater Panel, Radio Panel, Coat Hook, Door Seal, Quarter
Seal, Armrest, Door & Vent Handle, Roof Rail
| Part # |
Price |
| 3-0516 |
$43.00 |
| |
|
__________________________________________________________
69 Dodge Dart Exterior Fastener
Kit
52 pcs - Containing fasteners for
: Headlight Moulding, Parking Light, Outside Mirror, License Light,
Wheel Well
| Part # |
Price |
| 3-0517 |
$27.00 |
| |
|
_________________________________________________________
70-72 Dodge Dart 2Dr
Hardtop Interior Fastener Kit
106 pcs - Containing fasteners
for: Sill Plate, Pillar Mould, Steering Collar, Seat, Windshield,
Dash Bezel, Kick Panel, Center Mirror, Radio Panel, Sun Visor, Roof Rail,
Coat Hook, Headrest Collar, Door Seal, Quarter Seal, Arm Rest
| Part # |
Price |
| 3-0450 |
$42.00 |
| |
|
_________________________________________________ |
| 71-74
Dodge Charger Interior Screw Kit
108 pcs- Contains fasteners
for: Sill Plate Molding, Windshield Molding Upper, Pillar Molding,
Roof Rail Molding, Windshield Molding-Rear, Sun Visor, Center Mirror, Kick
Panel, Seat Latch Molding, Coat Hook, Door Seal, Quarter Seal, Speaker-Top
of Dash, A/C Side Vent, Console Top Molding, Shifter T-Handle, Seat Back,
Quarter Panel (Upper & Lower)
| Part # |
Price |
| 3-0503 |
$50.00 |
| |
|
_________________________________________________________
|
|
|
| 66-67 B
Body Underhood & Trunk Kit
187 pcs - Contains Stainless Steel
fasteners for the following: A/C Line, A/C Condenser Mount, A/C Dryer
Bracket, Gas Neck, Gas Filler Neck, Hood Hinge Brace, Hood Latch, Catch
& Bracket, Hood Safety Catch, Hood Hinge to Fender, Hood Hinge to
Hood, Trunk Latch & Catch, Deck Lid, Battery Tray, Battery Hold Down,
Horn Mount, Fender, Fender to Radiator Core, Rear Fender, Grille Emblem
Nut, Radiator Mount, Heater Blower Mount, Tail Light, Firewall,
Starter Relay, Ground Wire, Resistor Screw, ID Plate Screws, Master
Cylinder, Windshield Washer.
| Part # |
Price |
| 3-0518 |
132.00 |
_________________________________________________________
71 B Body Underhood & Trunk Kit
222 pcs - Contains fasteners
for: Battery Tray Mounting, Trunk Latch & Catch, Horn Mounting,
Deck Lid, Hood Latch, Hood Hinge, K Frame Rear Support, Radiator, Center
Support, Tail Light Mounting, Windshield Washer Tee & Tubing Screw
Kit, Vacuum Canister, Master Cylinder Nut Kit, Radiator Mounting, Starter
Relay, Voltage Regulator, Fan Shroud Bracket, K Frame Forward Support,
Accessory Code Plate (Option Tag), Blower Motor & Heater Core, Washer
Bottle Screw Kit, Sheet Metal Ground & Latch, A/C Canister, Wiper
Linkage, Fender Well Access, Evaporator Line Clamp, Fender Mounting
| Part # |
Price |
| 3-0504 |
118.00 |
| |
|
________________________________________________________________ |
| FENDER BOLT &
WASHER KIT
Polished Stainless Steel Hex Head Bolts and
Washers - Enough to do most Upper Fenders on MOPARS - Barracuda, CUDA,
Challenger, Roadrunner, GTX. 24 pcs
| Part # |
Price |
| 3-0456 |
$26.00 |
| |
|
_____________________________________________ |
| DODGE RAM 1500
Underhood kit
Polished Flange Head or Button Head Stainless Steel
Fastener Kit for Engine Bay - Fits 2004 & 2005 (May fit other years)
Contains fasteners for the following:
Fender Bolts, Top Radiator Support, Lower Radiator Support, Battery Mount,
Air Box Mount, Lower Hood Latch, Fuse Box, Headlight Retaining
Bolts. All bolts and washers are mirror polished. 46 pcs
| Part # |
Description |
Price |
| 3-0460 |
Flange Head, pol |
$52.00 |
| 3-0462 |
Button Head, pol |
$50.00 |
__________________________________________________
Dodge Dakota Under-Hood Fastener Kit
Button Head, Polished
Contains fasteners and washers for the
following: Upper Core Support, Hood Hinge Nuts, Small Fender Bolts
(front), Hood Latch, Large Fender Bolts (rear), Upper Condenser, Upper
Front Bumper, Horn Bracket, Cruise Control, Air Box, Master
Cylinder. 61 pcs
Fits 2000 to 2003 (May fit 1997, 1998 &
1999)
| Part # |
Price |
| 3-0466 |
$58.00 |
| |
|
________________________________________________
CHRYSLER 300 MISCELLANEOUS DRESS-UP KIT
Polished Kit - 102 pcs Contains
fasteners for the following: Hood Hinge, Hood Latch, Fenders, Ground
Nuts, A/C, Fender Nuts, Washer Tank, Fuse Block,. Headlights, Trunk Hinge,
Gas Fill Fits 2005 and Newer
Chrysler 300. 3-0530
$75.00 __________________________________________________________ |
| CHRYSLER
PT CRUISER
UNDERHOOD FASTENER KIT for PT Cruiser-
Contains fasteners for the Top of Grill & Inner Fender Bolts. 20
pcs Polished Button Head
3-0601 $10.00
TRUNK LATCH KIT for PT Cruiser - 2
pcs Polished Flat Head Socket Bolts
3-0606
$4.00
This picture below shows one original black
"ugly" bolt and the new polished Stainless Steel bolt.
What a difference!!
HOOD HINGE KIT FOR PT Cruiser - 8 pcs -
POLISHED
3-0608
$6.75
SHOCK TOWER KIT FOR PT Cruiser - 12 pcs
- POLISHED
3-0610
$10.00
WINDSHIELD COWL KIT FOR PT Cruiser - 14
pcs - POLISHED
3-0612
$5.00
________________________________________________
|
|
| MOPAR B
BODY FASTENER KITS
B BODY FRONT BUMPER KITS
| Part # |
Description |
# of Pcs |
Price |
| 3-0485 |
68-69 Charger |
32 |
18.00 |
| 3-0486 |
68-69 Coronet |
32 |
18.00 |
| 3-0487 |
70 Charger |
44 |
23.00 |
| 3-0488 |
70 Coronet |
48 |
26.00 |
|
| _______________________________________________________ |
|
68-70 Charger Miscellaneous Fasteners to
Frame & Body
CONTAINS 28 pcs FOR THE FOLLOWING
ITEMS: AXEL REBOUND, REAR BRAKE LINE SUPPORT, MUFFLER HANGER TO
FLOOR, TAILPIPE HANGER TO FRAME, FUEL TANK FILLER NECK, GAS CAP MOUNT
| Part # |
Price |
| 3-0489 |
$15.00 |
______________________________________________________________ |
|
B-BODY UNDERHOOD FASTENER KIT
ALL YEARS DO NOT INCLUDE ALL ITEMS
LISTED
STAINLESS FASTENERS FOR THE FOLLOWING ITEMS:
RADIATOR TO CORE SUPPORT, RADIATOR SHROUD TO RADIATOR, BATTERY TRAY,
HEADLIGHT GROUND, ODOMETER CABLE BRACKET, OPTION TAG, UPPER CONTROL ARM
ACCESS, WASHER BOTTLE, POSITIVE TO STARTER, HEATER BOX, A/C BLOWER MOUNT,
A/C HIGH PRESSURE LINE, A/C DRYER, A/C CONDENSER, A/C DRYER MOUNT, CRUISE
CONTROL SERVO, MASTER CYLINDER PLATE, MASTER CYLINDER COVER, WINDSHIELD
WIPER MOUNT, ACCELERATOR PEDAL.
| Part # |
Description |
# of Pcs |
Price |
| 3-0490 |
68 Charger / Coronet |
86 |
28.00 |
| 3-0491 |
69 Charger / Coronet |
87 |
29.00 |
| 3-0492 |
70 Charger / Coronet |
100 |
32.00 |
_______________________________________________________ |
|
B-BODY SHEET METAL & DOOR FASTENERS
ALL KITS DO NOT INCLUDE ALL ITEMS
LISTED
CONTAINS STAINLESS STEEL FASTENERS FOR THE
FOLLOWING ITEMS: FRONT VALANCE, FENDER TO INNER FENDER MOUNT, FENDER
TO FIREWALL, FENDER TO LOWER ROCKER, UPPER & LOWER GRILL CROSS BAR,
HOOD TO INNER FENDER, HOOD HINGE TO HOOD, HOOD STRIKER, HOOD SAFETY, DOOR
HINGE, DECK LID HINGE, LATCH MOUNT, STRIKER
| Part # |
Description |
# of Pcs |
Price |
| 3-0493 |
68 Charger |
192 |
87.00 |
| 3-0494 |
68 Coronet |
186 |
88.00 |
| 3-0495 |
69 Charger |
204 |
90.00 |
| 3-0496 |
69 Coronet |
198 |
91.00 |
| 3-0497 |
70 Charger & Coronet |
178 |
88.00 |
________________________________________________________ |
| B BODY
DOOR HINGE FASTENER KIT
Fits 68-70 B Body cars. Includes
fasteners for Upper & Lower Hinge and Upper & Lower Hinge to
Pillar. 44 pcs in Hex Head
3-0515
$35.00
_________________________________________________________ |
|
B BODY SUSPENSION FASTENER KIT 17-4
High Strength Stainless Steel Kit
contains 28 fasteners for the following: Front Shock, Leaf Spring
Front Mounting Bracket, Leaf Spring Rear Shackle Nut, Leaf Spring Front
Hanger Plate, Rear Shocks 3-5050
$74.50
______________________________________________________ |
|
B-BODY FRONT AREA FASTENER KITS
3-0498
68-69 Charger $17.00
Kit contains 82 pieces for the
following: Grill bar, Center of Grill, Grill Assembly, Headlight
Door
*************
3-0499
68 Coronet $8.00
Kit Contains 21 pieces for the
following: Grill, Headlight Bezel, Headlight to Grill
*************
3-0500
69 Coronet $7.00
Kit contains 24 pieces for the
following: Grill, Headlight Bezel
*************
3-0501
70 Charger
$12.00
Kit contains 54 pieces for the
following: Grill, Grill to Center Bracket, Outer, Upper Corner,
Headlight Door
*************
3-0502
70 Coronet $7.00
Kit contains 32 pieces for the
following: Grill Support Mounting Bracket, Lower Support Bracket,
Middle Bracket
________________________________________________________ |
|
Dodge & Plymouth Neon
Underhood Dress-Up Kit
Flange kits - 33 pcs
Button Kits - 60 pcs
3-0630 Hex Flange
Unpolished $19.20
3-0631 Hex Flange
Polished $30.00
3-0632 Button Head
Unpolished $11.75
3-0633 Button Head
Polished $19.00
____________________________________
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
