Ron Snell ronsnell@bellsouth.net Back to Undercarriage
678-455-3018
This lift is the Stinger ET Model. It has a 7000 lb weight capacity. It gives you 74" of lift height and 176" of drive-on surface. This will fit in a shop with a 10' high ceiling with no problem.
This is the assembly of two of the four posts, with cross brace.
We have assembled both sets of braces and are installing the ramps.
Now that the ramps are in place, we are installing the Aircraft cables that attach to the hydraulic cylinder. The pump on the hydraulic cylinder provides power to pull the cables, which raises the ramps. This unit comes with light-weight aluminum ramps and tire stops.
Here is the finished product before we put the car on and test it out.
The Barracuda is on the lift and off the ground!!!
We appreciate all the help that we have received from Ron Snell and Stinger Lifts.