Parts Received

1968 Plymouth Barracuda Fastback

email address - barracuda@mmsacc-stainless.com

Here are some of the parts that we have received for this project

 

Aluminum Heads.  Built by Hensley Racing.

  • Aluminum 84 cc Head
  • Stage 3
  • Double Springs
  • Stainless Steel Valves

Complete Wiring kit from Haywire

Crane Cam's Items

  • Cam
  • Lifters
  • Push Rods
  • Roller Rockers
  • Billet Timing Set

Received Rear End from Drive Train Specialists

Brand new DANA 60 completely assembled for our 1968 Plymouth Barracuda, complete with Strange 35 Spline Axles with 5-41/2 bolt circle, new Spicer 3.54 gear ratio, Spicer Traclock Posi, new 1350 series yoke, all new Timken Bearings and Seals, and a new custom Powder Coated Aluminum Support Cover (cover coming next week).

Received Mopar Tunnel Ram (sent to be polished), Oil Pan, Timing Cover, High Volume Oil Pump and Pick Up, Rod & Main Bearings, Piston Rings, Complete Gasket Set - from MOPARTSRACING.COM

Received the engine block back from Race Engine Design.  This is what was done to the block  -

  • Boiled & de-greased block
  • Magnafluxed block
  • Bored block - .030
  • Honed Cylinders with honing plate
  • R&R Cam Bearings
  • R&R Freeze Plugs
  • Regrind Crank 10-10 & Polish
  • Recondition Rods - new rod bolts
  • R&R Rods on Pistons
  • Balance Complete Assembly

  

These are the Front and Rear Disk Brake Set-Ups (Force 10) from Stainless Steel Brake Corp.  This is a complete kit, from bolts, brackets, brake lines, master cylinder, calipers, rotors, proportioning valve, and rear adjuster valve to rear dust shields.

Here is the Transmission Cooler from A Plus Hot Rod Shop

We have received the Stainless Steel Tilt Steering Column from Flaming River. 

 

Received the aluminum radiator from AFCO Hot Rod

 

Received these items from Taylor-Vertex

  • Wire Separators
  • Aluminum Battery Box for truck
  • Battery Cables (from trunk to engine)
  • HEI-Mag distributor

Here is the Taylor Vertex Magneto from Taylor Vertex

There is a pair of Race Demon 650 Carburetors from Barry Grant Fuel Systems

The Fuel Filter (BG5000), Fuel Pump (BG220) and Regulator from Barry Grant Fuel Systems

Received parts back from chrome & polishing shop.

  Automatic Torque Converter for Mopar 727  2500-3000 stall provided by Performance Torque Converters

Received the wheels and steering wheel from Colorado Custom

     

Coil-Over Shocks from QA1  for front & rear

     Front Shocks    

   Rear Shocks

 

Aluminum Drive Shaft from K & L Unlimited, Inc.

 

Headers from TTI, part # TTI 440-200-CC.  These are 2" primary tube with 3-1/2" collectors.

Here is the Alternator-A/C Bracket from Xtreme Billet.  It turned out so nice!

 

   

Here are the pictures of the Trans Pan  and Rear End Cover from PML Inc

 

06/20/2003 - Received Water Pump & Crank (Aluminum Pulleys from March Performance

 

06/20/03 - Received the Quick Ratio Steering Box from Flaming River Performance Parts.

07/14/2003 -  Received the following parts from Year One -

  • Door handles
  • Door locks
  • Trunk lock
  • Barracuda emblems
  • Mopar emblem
  • Glove Box
  • Tag light lens