Chevy / GM Braces
 Transmission Kits
 Engine
 Truck Items
 Starter Bolt Kits
 Rear End Bolt Kits
Chevrolet, General Motors, Jeep & AMC Braces

Made in the U.S.A. by MMS & Accessories

Polished Stainless Steel

1967-1969 CHEVROLET CAMARO       SS-0030

1967-1969 PONTIAC FIREBIRD             SS-0031

1970-1981 CHEVROLET CAMARO        SS-0032

$65.95 pair   

 Picture

_______________________________________________________________

1968 & 1969 RS Camaro Front Fender Braces

Polished Stainless Steel

SS-0045

$35.95 pair

___________________________________________________

1967-1969 CAMARO / FIREBIRD

SS-0086            $160.00 pair

1970-1981 CAMARO

SS-0087            $160.00 pair

CUSTOM ADJUSTABLE FENDER TO RADIATOR BRACE SET - POLISHED STAINLESS STEEL

This Brace Kit is made from 304 Stainless Steel and hand-polished.  This brace will strengthen the Front End. NOT MADE FROM STEEL THAT IS PLATED AND WILL PEEL AND RUST OR FROM ALUMINUM THAT WILL OXIDIZE.  All items for these braces are new, made in the U.S.A. by MMS & Accessories.  They have right-hand and left-hand 3/8 fine thread Heim Joints for easy adjustment.  All hardware is Stainless Steel.  Comes with 2 Rods, 4 Heim Joints, 4 Brackets (1/4" thick) and all fasteners in Button Head.  All items are polished.

________________________________________________________________

1983-1988 CHEVROLET MONTE CARLO FRONT FENDER BRACES

Polished Stainless Steel

Made in U.S.A. by MMS

SS-0108           $30.00 pair

   

 

1991-1996 General Motors "B BODY" REAR FRAME BRACE

Polished Stainless Steel with Bolts & Nuts

SS-0054         $55.00

 

1991 - 1996 Impala, Caprice & GM "B" Body Fender Braces

Set of 4 Braces, Polished Stainless Steel

SS-0050           $75.00

_____________________________________________________________

1991 - 1996 Impala, Caprice & GM "B" Body Core Support Front Braces

Pair of Braces. Polished Stainless Steel

SS-0052            $50.00

 

_____________________________________________________________

 

LS1 VALLEY PAN

SS-1090          $75.00

LS1 / LS6 VALLEY PAN STAINLESS- COMES WITH LOW PR0FILE HEAD STAINLESS BOLTS

THIS IS 1/8" , 304 BRUSHED STAINLESS STEEL

INTENDED FOR 1997-2004 GM

LS1 / LS6 ENGINES, THAT HAVE BEEN CONVERTED FROM EFI to CARBURATED MOTOR

SS-1090P     $120.00 - Polished

     Brushed   

        Polished

 

1955, 1956, 1957 CHEVROLET HOOD SUPPORT BRACE

Get rid of that ugly factory underhood brace on your Tri-Five Chevy and replace it with our new Stainless Steel brace. This beautiful brace will dress up your engine compartment while maintaining excellent hood support and strength. It is constructed of 16 gauge Polished Stainless Steel. It aligns with the factory upper radiator support bar when the hood is closed and will work with any car that does not have hoses passing over the top of the support, regardless of the radiator position.

SS-0142 1955 $175.00
SS-0144 1956 $175.00
SS-0146 1957 $175.00

DOES NOT INCLUDE TUBULAR BRACES - 55, 56 & 57 tubular braces are listed below.

 

CHEVROLET 1957 

Hood Braces SS-0034        $42.95

Polished Stainless Steel (pair)

CHEVROLET 1955

Hood Braces

Polished Stainless Steel

SS-0035            $50.00

 

CHEVROLET 1956

Hood Braces

Polished Stainless Steel

SS-0037           $85.00

 

1955, 1956, 1957 Chevy

Hood Latch Plate

Polished Stainless Steel

Made in U.S.A. by MMS & Accessories

SS-0091        $39.00

______________________________________________________

 

65 IMPALA

Front Fender Braces

Polished Stainless Steel

SS-1165     $45.00 pair

___________________________________________________

 

Chevelle Fender Braces

Polished Stainless Steel

SS-0064 1964 Chevelle $45.00 pair
SS-0046 1966 Chevelle $45.00 pair
SS-0049 1967 Chevelle $45.00 pair
SS-0047 1968-69 Chevelle $45.00 pair
SS-0068 70-72 Chevelle $45.00 pair
SS-0069 70-72 El Camino $45.00 pair
     

__________________________________________________________

1968-1972 CHEVELLE REAR FRAME BRACES

SS-0028           $55.00 PAIR

Brushed Finish Stainless Steel

_____________________________________________________

62-67 CHEVY NOVA, CHEVY II SHOCK TOWERS

Polished Stainless Steel

1-2701 Plain

$110.00

1-2705 S/S Cut

$125.00

1-2701

1-2705

Shock Tower Installed on Nova

 

___________________________________________________________

 

 

     CHEVROLET NOVA & CHEVY II 1966-1967

     Fender Braces

     Polished Stainless Steel

     SS-0066           $35.00

   

  

__________________________________________

CHEVROLET NOVA  1966-1967

BUMPER SUPPORT BRACES

Polished Stainless Steel

Made in U.S.A. by MMS

SS-0067          $79.00

   

 

________________________________________________

CHEVROLET NOVA & CHEVY II 1962-1965

Fender Braces

Polished Stainless Steel

SS-0106           $35.00

_________________________________

CHEVROLET NOVA 1968-1974

EMERGENCY BRAKE CABLE ROD

Polished Stainless Steel

SS-0094          $15.00

 

__________________________________________

CHEV SEDAN or HARDTOP HOOD LATCH SUPPORTS

  1955 & 1956

Polished Stainless Steel

1955          1-8760       $90.00

1956          1-8762       $90.00

   1957

1957          1-8764         $100.00

_________________________________________

41,46,47,48, CHEVY REAR FENDER BRACE,

For: FLEETLINE, FLEETMASTER, Stylemaster Sedan

SS-0110 $25.00 pair

 

____________________________________________

1-7001 62-67 NOVA STRUT RODS 

$180.00 pair

 

 

1-7002 65-70 Chevy Strut Rods 

$210.00 pair

 

 

______________________________________________

1962-1967 NOVA SHOCK TOWER BRACE

Polished Stainless Steel. This Shock Tower Brace Kit is made from 304 Stainless Steel and hand-polished. This brace will strengthen the front end. All items for these braces are new, made in the U.S.A.. They have right-hand and left-hand 3/8 fine thread Heim Joints for easy adjustment. All hardware is Stainless Steel

1-2710                  $165.00

 

 

 

 

 

 

 

 

 

_______________________________________________

 

73-75 FIREBIRD & TRANS AM FRONT FENDER TO CORE SUPPORT BRACES

SS-4607          $95.00

_________________________________________________________

 

75-81 TRANS AM CUSTOM ADJUSTABLE FENDER TO RADIATOR BRACE SET - POLISHED STAINLESS STEEL

SS-0089           $150.00 PAIR

This Brace Kit is made from 304 Stainless Steel and hand-polished. This brace will strengthen the front end. - NOT MADE FROM STEEL THAT IS PLATED AND WILL PEEL OR ALUMINUM THAT WILL OXIDIZE---All items for these braces are new, made in the U.S.A. by MMS.------ They have right-hand and left-hand 3/8 fine thread Heim Joints for easy adjustment. All hardware is Stainless Steel COMES WITH 2 RODS-4 HEIM JOINTS- AND ALL FASTENERS IN BUTTON HEAD.--- ALL ITEMS POLISHED

 

______________________________________________________

1982-1989 Pontiac Firebird

Radiator Support Braces

SS-4040           $45.00

Pair of Polished Stainless Steel Braces - Made by MMS in U.S.A.

___________________________________________________

1969-1970 GTO

Fender Braces

Polished Stainless Steel

SS-4151           $40.00

________________________________________________________

1973-1979 Buick Regal

Front Radiator Support Center Rods

SS-0053           $60.00 Pr

 

_______________________________________________________

AMX / JAVELIN Fender to Radiator Support Braces

SS-0033 1968-1974

Polished Stainless Steel with Polished Stainless Hex Flange Bolts

$65.95

______________________________________________________

AMC AMX FRONT BUMPER BRACKET POLISHED STAINLESS

1 PAIR

5-5005           $45.00

_____________________________________________________

5-7001 68-69 AMX / Javelin Strut Rods 

$180.00 Pair

5-7002 71-74 AMX / Javelin Strut Rods 

$180.00 Pair

  Picture is example

 

________________________________________________________

1970 AMX / JAVELIN

GRILL SUPPORT BRACES

Set of 4 BRACES - Polished Stainless Steel

5-5007          $90.00

 

 

JEEP GRILL SUPPORT BRACES

Pair of Polished Stainless Steel Braces

5-0501 1972-1986 $70.00
5-0505 1987-1995 $70.00

 

___________________________________________

JEEP CJ7 FENDER BRACES  & BATTERY BRACES

Fits 1985 - May fit other years of CJ7

5-0507     $150.00     6 Polished Stainless Steel Braces

 

 

 

rectrectrectrect

  75-81 TransAm Fender Support Braces

  Fender to Radiator Support Bars in Polished          Stainless Steel

  Made is USA by MMS

  SS-0036           $68.00

  

_____________________________________________

Pontiac Grand Prix Engine Compartment Brace

SS-0051

$105.50 pr

  • Fits 1997 - 2002 Pontiac Grand Prix
  • 1" Polished Stainless Steel Tubing
  • With Polished Button Head Bolts
  • After-Market Air Intakes Require 1/2" from bottom of brace to top of box
  • May fit other GM cars with same body

 

 

 

________________________________________________

AMX / JAVELIN CUSTOM ADJUSTABLE FENDER TO RADIATOR BRACE SET- POLISHED STAINLESS STEEL

1968 - 1974 AMX / JAVELIN

SS-0088           $150.00 PR

This Brace Kit is made from 304 Stainless Steel and hand-polished. This brace will strengthen the front end. - NOT MADE FROM STEEL THAT IS PLATED AND WILL PEEL OR ALUMINUM THAT WILL OXIDIZE---All items for these braces are new, made in the U.S.A. by MMS.------ They have right-hand and left-hand 3/8 fine thread Heim Joints for easy adjustment. All hardware is Stainless Steel COMES WITH 2 RODS-4 HEIM JOINTS- AND ALL FASTENERS IN BUTTON HEAD.--- ALL ITEMS POLISHED

 

_____________________________________________

AMX / JAVELIN LOWER FRONT FENDER BRACES

SS-5050           $40.00 PAIR

Polished Stainless Steel Braces made in U.S.A. by MMS & Accessories

These braces mount between the bottom of the Front Fenders & the Core Support